Kawasaki 750 Install


Trace the rough shape.


Cut the line and pry out.


Use a tool to pry and cut the out foam.


A cut off wheel will make the next step easy.


Use it to cut the plastic tube


Use a air chisel or other tool to pry out tube.


Remove tube flange.


Now you can begin installation.


Put the foothold in the pocket,


then trace to cut down to size.


Secure with rivets or screws.


Repeat for the other side. Then foam in behind the foothold, cut of the excess, sand flush. Fiberglass the edge to seal the deal. Turf to your comfort.

 

Finished install on a 800 SXR